From 477bfced7fdaa525f9cc7f13afdacb2a48f07379 Mon Sep 17 00:00:00 2001
From: Mitch Riedstra <mitch@riedstra.us>
Date: Mon, 23 Apr 2018 00:23:36 -0400
Subject: Massive changes, ssh and Nginx work!

Bump to 4.16.3 in /boot/syslinux.cfg

Add `ssh`, `nobody`, and `nogroup`, in `/etc/passwd` and `/etc/group`

Updated the init script to use `mdev`

Added a service definition for a getty on tty0
Added a service definition for sshd

Added busybox udhcpc `default.script` I *still need to check the
license* ( Copied from my Gentoo installation, and works )

Updated readme.md to reflect the fact that we pull in the commands from
`pfx` and you'll need to add `/lib/ld-musl-x86_64.so.1` or change the
PATH in `./inc`

Added rsync, ncdu xz and grub. Removed tar-pfx.sh Replaced with
cpio-pfx.sh

added `conf.sh` which will be taking care of basic system configuration
for now

Change configuration directory for libressl

Enable wide chars in `ncurses`

Use `/etc` for SSH configuration files

Remove make clean from tree.sh and xz.sh

Added relevant files to sources.lst
---
 local/usr/share/udhcpc/default.script | 59 +++++++++++++++++++++++++++++++++++
 1 file changed, 59 insertions(+)
 create mode 100644 local/usr/share/udhcpc/default.script

(limited to 'local/usr')

diff --git a/local/usr/share/udhcpc/default.script b/local/usr/share/udhcpc/default.script
new file mode 100644
index 0000000..b2fe4a3
--- /dev/null
+++ b/local/usr/share/udhcpc/default.script
@@ -0,0 +1,59 @@
+#!/bin/sh
+# udhcpc script edited by Tim Riker <Tim@Rikers.org>
+
+RESOLV_CONF="/etc/resolv.conf"
+
+[ -n "$1" ] || { echo "Error: should be called from udhcpc"; exit 1; }
+
+NETMASK=""
+[ -n "$subnet" ] && NETMASK="netmask $subnet"
+BROADCAST="broadcast +"
+[ -n "$broadcast" ] && BROADCAST="broadcast $broadcast"
+
+case "$1" in
+        deconfig)
+                echo "Setting IP address 0.0.0.0 on $interface"
+                ifconfig $interface 0.0.0.0
+                ;;
+
+        renew|bound)
+                echo "Setting IP address $ip on $interface"
+                ifconfig $interface $ip $NETMASK $BROADCAST
+
+                if [ -n "$router" ] ; then
+                        echo "Deleting routers"
+                        while route del default gw 0.0.0.0 dev $interface ; do
+                                :
+                        done
+
+                        metric=0
+                        for i in $router ; do
+                                echo "Adding router $i"
+                                if [ "$subnet" = "255.255.255.255" ]; then
+        # special case for /32 subnets:
+        # /32 instructs kernel to always use routing for all outgoing packets
+        # (they can never be sent to local subnet - there is no local subnet for /32).
+        # Used in datacenters, avoids the need for private ip-addresses between two hops.
+                                        ip route add $i dev $interface
+                                fi
+                                route add default gw $i dev $interface metric $((metric++))
+                        done
+                fi
+
+                echo "Recreating $RESOLV_CONF"
+                # If the file is a symlink somewhere (like /etc/resolv.conf
+                # pointing to /run/resolv.conf), make sure things work.
+                realconf=$(readlink -f "$RESOLV_CONF" 2>/dev/null || echo "$RESOLV_CONF")
+                tmpfile="$realconf-$$"
+                > "$tmpfile"
+                [ -n "$domain" ] && echo "search $domain" >> "$tmpfile"
+                for i in $dns ; do
+                        echo " Adding DNS server $i"
+                        echo "nameserver $i" >> "$tmpfile"
+                done
+                mv "$tmpfile" "$realconf"
+                ;;
+esac
+
+exit 0
+
-- 
cgit v1.2.3