1 files changed, 95 insertions, 0 deletions
diff --git a/tools/icomsio.sh b/tools/icomsio.sh
new file mode 100755
index 0000000..f5f126d
--- /dev/null
+++ b/tools/icomsio.sh
@@ -0,0 +1,95 @@
+#!/usr/bin/env bash
+#
+# ICOM ID-RP* serial helper script
+#
+# Copyright 2009 Dan Smith <dsmith@danplanet.com>
+#
+# This script will scan the USB bus on this system and determine
+# the product ID of any attached ICOM repeater modules.  It will
+# unload and then reload the FTDI serial driver with the proper
+# options to detect the device.  After that, it will determine the
+# device name and link /dev/icom to that device for easy access.
+
+LINK="icom"
+VENDOR="0x0c26"
+DEVICE=$(lsusb -d ${VENDOR}: | cut -d ' ' -f 6 | cut -d : -f 2 | sed -r 's/\n/ /g')
+
+product_to_name() {
+    local prod=$1
+
+    if [ "$prod" = "0012" ]; then
+        echo "ID-RP2000V TX"
+    elif [ "$prod" = "0013" ]; then
+        echo "ID-RP2000V RX"
+    elif [ "$prod" = "0010" ]; then
+        echo "ID-RP4000V TX"
+    elif [ "$prod" = "0011" ]; then
+        echo "ID-RP4000V RX"
+    elif [ "$prod" = "000b" ]; then
+        echo "ID-RP2D"
+    elif [ "$prod" = "000c" ]; then
+        echo "ID-RP2V TX"
+    elif [ "$prod" = "000d" ]; then
+        echo "ID-RP2V RX"
+    else
+        echo "Unknown module (id=${prod})"
+    fi
+}
+
+if [ $(id -u) != 0 ]; then
+    echo "This script must be run as root"
+    exit 1
+fi
+
+if [ -z "$DEVICE" ]; then
+    echo "No devices found"
+    exit 1
+fi
+
+if echo $DEVICE | grep -q ' '; then
+    echo "Multiple devices found.  Choose one:"
+    i=0
+    for dev in $DEVICE; do
+        name=$(product_to_name $dev)
+        echo "  ${i}: ${name}"
+        i=$(($i + 1))
+    done
+
+    echo -n "> "
+    read num
+
+    array=($DEVICE)
+
+    DEVICE=${array[$num]}
+    if [ -z "$DEVICE" ]; then
+        exit
+    fi
+fi
+
+modprobe -r ftdi_sio || {
+    echo "Unable to unload ftdi_sio"
+    exit 1
+}
+
+modprobe ftdi_sio vendor=${VENDOR} product=0x${DEVICE} || {
+    echo "Failed to load ftdi_sio"
+    exit 1
+}
+
+sleep 0.5
+
+info=$(lsusb -d ${VENDOR}:0x${DEVICE})
+bus=$(echo $info | cut -d ' ' -f 2 | sed 's/^0*//')
+dev=$(echo $info | cut -d ' ' -f 4 | sed 's/^0*//')
+
+for usbserial in /sys/class/tty/ttyUSB*; do
+    driver=$(basename $(readlink -f ${usbserial}/device/driver))
+    device=$(basename $usbserial)
+    if [ "$driver" = "ftdi_sio" ]; then
+        name=$(product_to_name $DEVICE)
+        ln -sf /dev/${device} /dev/${LINK}
+        echo "Device $name is /dev/${device} -> /dev/${LINK}"
+        break
+    fi
+done
+